Select Measuring Signal (Drive) - Teledyne T3MIL50 User Manual

Select Measuring Signal (Drive)

Background
Note
1. Select Drive
32
Resistance measurement has 6 different measuring signals
that can be applied to obtain a resistance measurement:
DC+, DC-, Pulse, PWM, Zero and Standby.
The Drive function is only applicable to the T3MIL50X.
The drive signal for the T3MIL50 is fixed to DC+ and
Standby.
The Drive function cannot be used with the Scan or Diode
functions. In addition, the "Zero" drive setting is only
available with the Ohm measurement function.
Press the Drive
keys to select a drive signal.
Drive Range DC+, DC-, Pulse, PWM, Zero, Standby
T3MIL Series User Manual
key and use the up and down arrow
Drive mode
Drive selection
indicator
Set drive signal