lead to the panel due to the different temperature between internal and
external parts of the instrument. Therefore, please wait 1 minute in order to
obtain an accurate value after the test leads have been connected or
disconnected.
* When Kelvin clips are used to resume testing after a long period of time,
please wait for a short time to stabilize the measurement.
*Fast and Slow measurement rates have the same specifications. However, the
Slow rate is more accurate as it will correct for any errors associated with
temperature drift that occurs from the difference between the measurement
temperature and the calibration temperature.
Measurement
Auto-ranging
Over input range
Maximum Applied
voltage*
Comparator
Buzzer mode switchable OFF, PASS, FAIL
*Only when HVP (High Voltage Protect) function is enabled, can Maximum
Applied voltage be available. Refer to page 71 for details.
Dry Resistance Measurement
Range
500mΩ
5Ω
50Ω
Temperature Measurement
Temperature sensor
-10˚C ~40˚C
Other
Temperature Correction Function
Reference temperature
range
Thermal coefficient
range
Temperature range
-10˚C~40.0˚C
Other
146
Four-terminal method.
Provided.
"------" indicates over range
5m~5Ω range: 30VpDC
Other range: 100VpDC
20 sets of comparator status can be selected.
Measuring Current
100mA
10mA
1mA
Platinum resistor.
Lead length: 1.5m approx.
0.3%±0.5˚C
0.3%±1.0˚C
-50.0˚C~399.9˚C
±9999 ppm
Accuracy of temperature compensation for 3930
ppm/Cu wire.*
0.3%+resistance measurement accuracy.
0.6%+resistance measurement accuracy.
T3MIL Series User Manual
Accuracy
±(0.3%+0.05%)
±(0.3%+0.05%)
±(0.3%+0.05%)