Rear Panel Overview - Teledyne T3MIL50 User Manual

Rear Panel Overview

GPIB
AC 100 240V , 50 60Hz
25VA MAX
AC power input
AC Input
RS-232 Port
USB Device Port
Handler / Scan /
EXT I/O Port
Temperature Sensor
Port
20
RS232 port
RS232
WARNING
TO AVOID SHOCK,
REMOVE INPUTS BEFORE OPENING.
SER.NO. LABEL
Temperature sensor port
Accepts the power cord. AC 100 -
AC 100 240V , 50 60Hz
25VA MAX
240Vac; 50 - 60Hz.
For the power up sequence, see page
23.
Accepts an RS-232C cable for remote
RS232
control; DB-9 male connector.
For remote control details, see page 85.
USB device port for remote control.
See page 84 for details.
HANDLER / SCAN / EXT I/O
TC SENSOR
T3MIL Series User Manual
Handler/Scan/Ext I/O
HANDLER / SCAN / EXT I/O
TC SENSOR
The Handler / Scan / EXT I/O
port is used to output
pass/fail/high/low comparison
results. This port is also used for
the user-programmable EXT I/O
pins.
The temperature sensor input is for a
PT-100 temperature probe.
USB B
port