Thermal Conductivity Analyzer
Introduction
1.7 Rear Panel (Equipment Interface)
The rear panel, shown in Figure 1-2, contains the gas and electrical
connectors for external inlets and outlets. The connectors are described
briefly here and in detail in the Installation chapter of this manual.
Figure 1-3: Model 2000RS Rear Panel (sealed air option)
Power Connection: 24VDC power source.
Gas Connections: Sample in and Sample out, and Reference in and
Reference out.
RS-232: Serial digital concentration signal output and control input.
Profibus: Connection for Profibus communication.
LAN: Serial digital communications for local
network access (not implemented)
Teledyne Analytical Instruments
5