Table of Contents
Advertisement
VT6L Maintenance 17. Felt Sheet
17.3 Replacing Joint #3 Felt Sheet
Maintenance
Felt Sheet
parts
Joint #3
(1) Turn OFF the Manipulator.
Felt Sheet
(2) Remove the Arm #2 Cover.
Removal
(3) Remove Joint #3 felt sheet from the Arm #2.
Joint #3
(1) Hold a slit on the one side of the Joint #3 felt sheet to remove the sheet from the outside
Felt Sheet
Installation
(2) Mount the Arm #2 Cover.
132
Name
Reference: 7.2 Arm #2 Cover
Hold a slit on the one side of felt sheet to remove the sheet
from the outside of the Joint #3.
of the Joint #3.
One side of the felt sheet is a seal. Attach the felt sheet so that it fits in the groove of the
Joint #3 of Arm #2.
Reference: 7.2 Arm #2 Cover
Quantity
1
1755084
VT series Maintenance Manual Rev.2
Note
Joint #3
Felt Sheet
Advertisement
Table of Contents
