Felt Sheet - Epson VT Series Maintenance Manual

17. Felt Sheet

■ To shut off power to the robot system, disconnect the power plug from the power
source. Be sure to connect the power cable to a power plug.
DO NOT connect it directly to a factory power source.
■ Before performing any replacement procedure, turn OFF the Controller and
WARNING related equipment, and then disconnect the power plug from the power source.
Performing any replacement procedure with the power ON is extremely hazardous
and may result in electric shock and/or malfunction of the robot system.
VT series Maintenance Manual Rev.2
Joint #1 Felt Sheet
(Inside of Arm)
Joint #1 Felt Sheet
(Back of Arm #1 cover)
Joint #3 Felt Sheet
Joint #2 Felt Sheet
VT6L Maintenance 17. Felt Sheet
129