Protection Model - Epson VT Series Maintenance Manual

18.6.2 Protection Model

SD Card (1) Turn OFF the Manipulator.
Removal
(2) Remove the power plug.
(3) Remove the connector plate.
Protection
(4) Push the SD card which is inserted near the optional slot to eject.
SD Card (1) Push the SD card and inset to the SD card slot near the optional slot.
Installation
(2) Mount the connector plate.
Protection
VT series Maintenance Manual Rev.2
Reference: 7.7 Connector Plate
Reference: 7.7 Connector Plates
VT6L Maintenance 18. Controller Unit
149