Configuring The Pulse/Frequency; Switch Output - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Proline Prosonic Flow E 100 HART
Parameter
20 mA value
Fixed current
Damping output 1
Failure mode
Failure current
* Visibility depends on order options or device settings
Endress+Hauser
Prerequisite
One of the following options is
selected in the Current span
parameter (→  46):
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
The Fixed current option is
selected in the Current span
parameter (→  46).
One of the following options is
selected in the Assign current
output parameter (→  46):
• Volume flow
• Mass flow
• Sound velocity
• Flow velocity
*
• Temperature
*
• Acceptance rate
*
• Signal strength
*
• Signal to noise ratio
*
• Turbulence
*
• Signal asymmetry
One of the following options is
selected in the Current span
parameter (→  46):
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
One of the following options is
selected in the Assign current
output parameter (→  46):
• Volume flow
• Mass flow
• Sound velocity
• Flow velocity
*
• Temperature
*
• Acceptance rate
*
• Signal strength
*
• Signal to noise ratio
*
• Turbulence
*
• Signal asymmetry
One of the following options is
selected in the Current span
parameter (→  46):
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
The Defined value option is
selected in the Failure mode
parameter.
10.4.4 Configuring the pulse/frequency/switch output
The Pulse/frequency/switch output submenu contains all the parameters that must be
configured for the configuration of the selected output type.
Description
Enter 20 mA value.
Defines the fixed output
current.
Set reaction time for output
signal to fluctuations in the
measured value.
Define output behavior in
alarm condition.
Enter current output value in
alarm condition.
Commissioning
Selection / User Factory setting
entry
Signed floating-point Depends on country
number and nominal
diameter
0 to 22.5 mA 22.5 mA
0.0 to 999.9 s 1.0 s
• Min. Max.
• Max.
• Last valid value
• Actual value
• Defined value
0 to 22.5 mA 22.5 mA
47