Simulation - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Proline Prosonic Flow E 100 HART
Parameter
Define access code
Confirm access code
Operating time
Reset access code
Device reset
Endress+Hauser
Navigation
"Setup" menu → Advanced setup → Administration
‣
Administration
‣
Define access code
‣
Reset access code
Device reset
Parameter overview with brief description
Description
Restrict write-access to parameters to
protect the configuration of the device
against unintentional changes.
Confirm the entered access code.
Indicates how long the device has been in
operation.
Reset access code to factory settings.

For a reset code, contact your
Endress+Hauser service organization.
The reset code can only be entered via:
• Web browser
• DeviceCare, FieldCare (via service
interface CDI-RJ45)
• Fieldbus
Reset the device configuration - either
entirely or in part - to a defined state.
10.6

Simulation

The Simulation submenu enables you to simulate, without a real flow situation, various
process variables in the process and the device alarm mode and to verify downstream
signal chains (switching valves or closed-control loops).
Define access code
Confirm access code
Operating time
Reset access code
User entry / User interface /
Selection
Max. 16-digit character string
comprising numbers, letters
and special characters
Max. 16-digit character string
comprising numbers, letters
and special characters
Days (d), hours (h), minutes
(m) and seconds (s)
Character string comprising
numbers, letters and special
characters
• Cancel
• To delivery settings
• Restart device
• Restore S-DAT backup
Commissioning
→  63
→  63
→  63
→  63
→  63
Factory setting
–
–
–
0x00
Cancel
63