Using Parameters For Device Administration - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Commissioning
Parameter
Decimal places 4
Display language
Display interval
Display damping
Header
Header text
Separator
Backlight
* Visibility depends on order options or device settings
62
Prerequisite
A measured value is specified
in the Value 4 display
parameter.
A local display is provided.
A local display is provided.
A local display is provided.
A local display is provided.
In the Header parameter, the
Free text option is selected.
A local display is provided.
–
10.5.6

Using parameters for device administration

The Administration submenu systematically guides the user through all the parameters
that can be used for device administration purposes.
Description
Select the number of decimal
places for the display value.
Set display language.
Set time measured values are
shown on display if display
alternates between values.
Set display reaction time to
fluctuations in the measured
value.
Select header contents on local
display.
Enter display header text.
Select decimal separator for
displaying numerical values.
Switch the local display
backlight on and off.
Proline Prosonic Flow E 100 HART
Selection / User Factory setting
entry
• x x.xx
• x.x
• x.xx
• x.xxx
• x.xxxx
• English English
*
• Deutsch (alternatively, the
*
• Français ordered language is
*
• Español preset in the device)
*
• Italiano
*
• Nederlands
*
• Portuguesa
*
• Polski
• русский язык
*
(Russian)
*
• Svenska
*
• Türkçe
*
• 中文 (Chinese)
• 日本語
*
(Japanese)
*
• 한국어 (Korean)
*
• ‫( ا ل ْ ع َ ر َب ي ّة‬Arabic)
*
• Bahasa Indonesia
*
• ภาษาไทย (Thai)
• tiếng Việt
*
(Vietnamese)
*
• čeština (Czech)
1 to 10 s 5 s
0.0 to 999.9 s 0.0 s
• Device tag Device tag
• Free text
Max. 12 characters ------------
such as letters,
numbers or special
characters (e.g. @,
%, /)
• . (point) . (point)
• , (comma)
• Disable Enable
• Enable
Endress+Hauser