Table of Contents
Advertisement
Installation
20
6.2.4
Turning the display module
The local display is only available with the following device version:
Order code for "Display; Operation", option B: 4-line; lit, via communication
The display module can be turned to optimize display readability.
Aluminum housing version, AlSi10Mg, coated
3.
2.
1.
3 mm
6.3
Post-mounting check
Is the device undamaged (visual inspection)?
Does the measuring device conform to the measuring point specifications?
For example:
• Process temperature
• Process pressure (refer to the section on "Pressure-temperature ratings" in the "Technical
Information" document)
• Ambient temperature range
• Measuring range
Has the correct orientation for the sensor been selected → 17?
• According to sensor type
• According to medium temperature
• According to medium properties (outgassing, with entrained solids)
Does the arrow on the sensor match the direction of flow of the medium through the piping
→ 17?
Are the measuring point identification and labeling correct (visual inspection)?
Is the device adequately protected from precipitation and direct sunlight?
Are the securing screw and securing clamp tightened securely?
Proline Prosonic Flow E 100 HART
5.
4.
4.
4.
7.
6.
A0023192
Endress+Hauser
Advertisement
Table of Contents
Need help?
Do you have a question about the Proline Prosonic Flow E 100 HART and is the answer not in the manual?