16.11 Operability - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Proline Prosonic Flow E 100 HART
Process connections
Local display
Endress+Hauser
Process connections
• Stainless steel:
• 1.4301 (304)
• 1.4306 (304L)
• 1.4404 (316L)
• 1.4571 (316Ti)
• Steel S235JR (1.0038)
• Carbon steel A105
List of all available process connections →  101
Flanges:
• EN 1092-1 (DIN 2501)
• ASME B16.5
For information on the different materials used in the process connections →  101

16.11 Operability

The local display is only available with the following device order code:
Order code for "Display; operation", option B: 4-line; illuminated, via communication
Display element
• 4-line liquid crystal display with 16 characters per line.
• White background lighting; switches to red in event of device errors.
• Format for displaying measured variables and status variables can be individually
configured.
• Permitted ambient temperature for the display: –20 to +60 °C (–4 to +140 °F). The
readability of the display may be impaired at temperatures outside the temperature
range.
Disconnecting the local display from the main electronics module
In the case of the "Compact, aluminum coated" housing version, the local display must
only be disconnected manually from the main electronics module. In the case of the
"Compact, hygienic, stainless" and "Ultra-compact, hygienic, stainless" housing
versions, the local display is integrated in the housing cover and is disconnected from
the main electronics module when the housing cover is opened.
"Compact, aluminum coated" housing version
The local display is plugged onto the main electronics module. The electronic connection
between the local display and main electronics module is established via a connecting
cable.
For some work performed on the measuring device (e.g. electrical connection), it is
advisable to disconnect the local display from the main electronics module:
1. Press in the side latches of the local display.
2. Remove the local display from the main electronics module. Pay attention to the
length of the connecting cable when doing so.
Once the work is completed, plug the local display back on.
Technical data
101