Configuring The Pulse/Frequency; Switch Output - Endress+Hauser Proline Promass H 300 PROFINET Operating Instructions Manual

Proline Promass H 300 PROFINET
Parameter
Operating mode
Endress+Hauser
10.5.9 Configuring the pulse/frequency/switch output
The Pulse/frequency/switch output wizard guides you systematically through all the
parameters that can be set for configuring the selected output type.
Navigation
"Setup" menu → Advanced setup → Pulse/frequency/switch output
‣
Pulse/frequency/switch output
1 to n
Operating mode
Parameter overview with brief description
Description
Define the output as a pulse, frequency or

switch output.

Configuring the pulse output
Navigation
"Setup" menu → Pulse/frequency/switch output
‣
Pulse/frequency/switch output
1 to n
Operating mode
Terminal number
Signal mode
Assign pulse output
Value per pulse
Pulse width
Failure mode
Invert output signal
Selection
• Pulse
• Frequency
• Switch
Commissioning
→  101
Factory setting
Pulse
→  102
→  102
→  102
→  102
→  102
→  102
→  102
→  102
101