16.10 Mechanical Construction - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Proline Prosonic Flow E 100 HART
Design, dimensions
Weight
Order code for "Housing", option A "Compact, aluminum, coated"
Nominal diameter Version
[mm]
50 Single-path
65 Single-path
80 Single-path
100 Two-path
150 Two-path
1) Pressure rating PN 40 (DN 50), PN 16 (DN 65 to 150)
2) Pressure rating, class 150
3) Pressure rating PN 10/16
4) Pressure rating PN 10
Order code for "Housing", option A "Compact, aluminum, coated"
Nominal diameter
[in]
2
3
Endress+Hauser
NOTICE
Electronics overheating on account of thermal insulation!
‣
Observe maximum permitted insulation height of the transmitter neck so that the
transmitter head is completely free.
t Maximum insulation thickness 2 cm (0.79 in)
a Minimum distance from transmitter to insulation

16.10 Mechanical construction

For the dimensions and installation lengths of the device, see the "Technical
Information" document, "Mechanical construction" section.
Weight in SI units
Compact version
Fixed flange
EN 1092-1 ASME B16.5
1)
(DIN 2501) [kg]
[kg]
9.15 8.00
10.8 –
12.2 12.8
16.1 18.1
25.4 26.4
Weight in US units
Compact version
Version
Single-path
Single-path
Lap joint flange
2)
EN 1092-1 ASME B16.5
3)
(DIN 2501)
[kg]
8.90
10.7
12.2
16.0
22.0
Fixed flange
1)
ASME B16.5
[lbs]
17.6
28.2
Technical data
t
a
Lap joint flange, stamped
plate
2)
EN 1092-1 (DIN 2501)
[kg] [kg]
8.10 7.20
– 8.10
12.9 8.80
17.9 11.2
26.2 17.5
Lap joint flange
1)
ASME B16.5
[lbs]
17.9
28.5
A0034104
4)
99