Conditioning - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Commissioning
Parameter
Failure mode
Invert output signal
54
Prerequisite
–
–
10.4.5 Configuring the output conditioning
The Output conditioning submenu contains all the parameters that must be configured
for the configuration of output conditioning.
Navigation
"Setup" menu → Output conditioning
Structure of the"Output conditioning" submenu
‣
Output conditioning
Assign current output
Damping output 1
Measuring mode output 1
Assign frequency output
Damping output 1
Measuring mode output 1
Assign pulse output
Measuring mode output 1
Operating mode totalizer 1
Description
Define output behavior in
alarm condition.
Invert the output signal.
Proline Prosonic Flow E 100 HART
Selection / User Factory setting
entry
• Actual status Open
• Open
• Closed
• No No
• Yes
→  55
→  55
→  55
→  55
→  55
→  55
→  55
→  55
→  55
Endress+Hauser