Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual page 59

Proline Prosonic Flow E 100 HART
Parameter
Operating time
Last backup
Configuration management
Comparison result
Endress+Hauser
You can do so using the Configuration management parameter and the related options
found in the .
Navigation
"Setup" menu → Advanced setup → Configuration backup display
‣
Configuration backup display
Operating time
Last backup
Configuration management
Comparison result
Parameter overview with brief description
Prerequisite
–
A local display is provided.
A local display is provided.
A local display is provided.
Function scope of the "Configuration management" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
Compare The device configuration saved in the is compared with the current device
configuration of the HistoROM backup.
Clear backup data The backup copy of the device configuration is deleted of the device.
While this action is in progress, the configuration cannot be edited via the local
display and a message on the processing status appears on the display.
Description
Indicates how long the device
has been in operation.
Indicates when the last data
backup was saved to the
display module.
Select action for managing the
device data in the display
module.
Comparison between present
device data and display
backup.
Commissioning
→  59
→  59
→  59
→  59
User interface / Factory setting
Selection
Days (d), hours (h), –
minutes (m) and
seconds (s)
Days (d), hours (h), –
minutes (m) and
seconds (s)
• Cancel Cancel
• Execute backup
• Restore
• Duplicate
• Compare
• Clear backup data
• Settings identical Check not done
• Settings not
identical
• No backup
available
• Backup settings
corrupt
• Check not done
• Dataset
incompatible
59