12.10 Resetting The Measuring Device; 12.10.1 Function Scope Of The "Device Reset" Parameter; 12.11 Device Information - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Proline Prosonic Flow E 100 HART
Endress+Hauser
Info number
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1444 Device verification passed
I1445 Device verification failed
I1459 I/O module verification failed
I1461 Sensor verification failed
I1462 Sensor electronic module verific. failed
I1512 Download started
I1513 Download finished
I1514 Upload started
I1515 Upload finished
I1624 Reset all totalizers
I1627 Web server: login successful
I1629 CDI: login successful
I1631 Web server access changed
I1633 CDI: login failed
I1634 Reset to factory settings
I1635 Reset to delivery settings
I1649 Hardware write protection activated
I1650 Hardware write protection deactivated
I1725 Sensor electronic module (ISEM) changed

12.10 Resetting the measuring device

Using theDevice reset parameter (→  63) it is possible to reset the entire device
configuration or some of the configuration to a defined state.

12.10.1 Function scope of the "Device reset" parameter

Options Description
Cancel No action is executed and the user exits the parameter.
To delivery settings Every parameter for which a customer-specific default setting was ordered is reset
to this customer-specific value. All other parameters are reset to the factory
setting.

Restart device The restart resets every parameter whose data are in the volatile memory (RAM)
to the factory setting (e.g. measured value data). The device configuration remains
unchanged.

12.11 Device information

The Device information submenu contains all parameters that display different
information for device identification.
Info name
This option is not visible if no customer-specific settings have been ordered.
Diagnostics and troubleshooting
83