Table of Contents
Advertisement
Proline Prosonic Flow E 100 HART
Ambient temperature
range
Storage temperature
Degree of protection
Shock resistance
Vibration resistance
Electromagnetic
compatibility (EMC)
Medium temperature range
Pressure-temperature
ratings
Endress+Hauser
Pulse/frequency output
Temperature coefficient
16.7
Installation
"Mounting requirements" → 16
16.8
Environment
Transmitter
Local display
Sensor
‣
If operating outdoors:
Avoid direct sunlight, particularly in warm climatic regions.
All components apart from display modules:
–50 to +80 °C (–58 to +176 °F), preferably at +20 °C (+68 °F)
Transmitter and sensor
• As standard: IP66/67, type 4X enclosure
• When housing is open: IP20, type 1 enclosure
Shock due to rough handling following IEC 60068-2-31
• Oscillation, sinusoidal, following IEC 60068-2-6
• 2 to 8.4 Hz, 3.5 mm peak
• 8.4 to 500 Hz, 1 g peak
• Oscillation, broadband noise following IEC 60068-2-64
• 10 to 200 Hz, 0.003 g
• 200 to 2 000 Hz, 0.001 g
• Total: 1.54 g rms
• As per IEC/EN 61326-1, IEC/EN 61326-2-3 and NAMUR Recommendation 21 (NE 21)
• Complies with emission limits for industry as per EN 55011 (Class A)
Details are provided in the Declaration of Conformity.
16.9
Process
Sensor
+0 to +150 °C (+32 to +302 °F)
An overview of the pressure-temperature ratings for the process connections is
provided in the "Technical Information" document
No additional effect. Included in accuracy.
–25 to +60 °C (–13 to +140 °F)
–20 to +60 °C (–4 to +140 °F), the readability of the display may be
impaired at temperatures outside the temperature range.
–25 to +60 °C (–13 to +140 °F)
2
/Hz
2
/Hz
Technical data
97
Advertisement
Table of Contents
Need help?
Do you have a question about the Proline Prosonic Flow E 100 HART and is the answer not in the manual?