Adapting The Measuring Device To The Process; Conditions; Performing A Totalizer Reset - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Operation
Parameter
Totalizer value 1 to n
Totalizer overflow 1 to n
70
Navigation
"Diagnostics" menu → Measured values → Totalizer
‣
Totalizer
Totalizer value 1 to n
Totalizer overflow 1 to n
Parameter overview with brief description
Prerequisite
One of the following options is selected
in the Assign process variable
parameter (→  58) of the Totalizer
1 to n submenu:
• Volume flow
• Mass flow
One of the following options is selected
in the Assign process variable
parameter (→  58) of the Totalizer
1 to n submenu:
• Volume flow
• Mass flow
11.5

Adapting the measuring device to the process

conditions

The following are available for this purpose:
• Basic settings using theSetup menu (→  43)
• Advanced settings using theAdvanced setup submenu (→  57)
11.6

Performing a totalizer reset

The totalizers are reset in the Operation submenu:
• Control Totalizer
• Reset all totalizers
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n
Preset value 1 to n
Reset all totalizers
Proline Prosonic Flow E 100 HART
Description
Displays the current totalizer counter
value.
Displays the current totalizer overflow.
→  70
→  70
User interface
Signed floating-point
number
Integer with sign
→  71
→  71
→  71
Endress+Hauser