Output Values; Totalizer" Submenu - Endress+Hauser Proline Prosonic Flow E 100 HART Operating Instructions Manual

Proline Prosonic Flow E 100 HART
Parameter
Signal strength
Asymmetry
Signal to noise ratio
Turbulence
Parameter
Output current 1
Measured current 1
Pulse output 1
Output frequency 1
Switch status 1
Endress+Hauser
Parameter overview with brief description
Prerequisite
–
The Dual path sensor option
is selected in the Path
configuration parameter
parameter.
–
–
11.4.3

Output values

The Output values submenu contains all the parameters needed to display the current
measured values for every output.
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Output values
Output current 1
Measured current 1
Pulse output 1
Output frequency 1
Switch status 1
Parameter overview with brief description
Prerequisite
–
–
The Pulse option is selected in the
Operating mode parameter parameter.
In the Operating mode parameter, the
Frequency option is selected.
The Switch option is selected in the
Operating mode parameter.
11.4.4

"Totalizer" submenu

The Totalizer submenu contains all the parameters needed to display the current
measured values for every totalizer.
Description
Displays the current signal
strength.
Displays the asymmetry of the
measured values between
signal path 1 and signal path
2.
Displays the current signal-to-
noise ratio.
Displays the current
turbulence.
Description
Displays the current value currently
calculated for the current output.
Displays the current value currently
measured for the current output.
Displays the pulse frequency currently
output.
Displays the value currently measured
for the frequency output.
Displays the current switch output
status.
User interface Factory setting
Signed floating-point –
number
Signed floating-point 0 %
number
Signed floating-point –
number
Signed floating-point –
number
→  69
→  69
→  69
→  69
→  69
User interface
3.59 to 22.5 mA
0 to 30 mA
Positive floating-point
number
0.0 to 12 500.0 Hz
• Open
• Closed
Operation
69