Sensors & Software CONQUEST 100 User Manual page 70

Conquest 100 Line Scan
Figure 6-2: Input a line number to go directly to it
To collect data without saving it, press No Save Mode. Any data collected will NOT be saved,
but screen shots can still be taken with the Camera button. These screenshots get placed in
the currently selected project.
If the line number is white (Figure 6-1), Press Start to enter data acquisition mode. All data
collected will be saved under this line number.
If the line number is shown in red (Figure 6-3), you will see the data preview on the right side of
the screen. If it's a long line, only the last part of the data will be shown. From this screen, you
will have the following additional options available:
Figure 6-3: Line Scan menu showing a line previously collected
60