Table of Contents
Advertisement
Conquest 100
Insert Battery into Display Unit
Conquest 100 uses a Lithium-Ion battery with an external "Battery Level" button to indicate the
current level of battery charge.
Note: When using the battery for the first time, be aware that the battery is shipped from
the factory at about 50% capacity in a "transport" state for increased safety. The battery
and battery level button will not work until the battery has been initialized by either:
a)
Inserting the battery into the Display Unit and then plugging the Battery Charger/AC
Adapter into an AC source and connecting it to the Display Unit, or
b)
Connecting the battery to the optional desktop charger.
The battery can be used immediately after initializing it but with a capacity of 50%, it won't last
as long. It is best to fully charge the battery before use.
Figure 3-4: Sensor cable connection to the Sensor Head
19
Assembling Conquest
Advertisement
Table of Contents
Need help?
Do you have a question about the CONQUEST 100 and is the answer not in the manual?
Questions and answers