Language; Units; Date/Time - Sensors & Software CONQUEST 100 User Manual

Conquest 100 Tools & Setup

5.1.1 Language

Selecting this language will display the screen shown in Figure 5-3. The current language is
displayed; pressing the + and – buttons on either side of the language will cycle between the
languages currently available: English, French, Spanish, German, Japanese and Chinese. All
text and functions will be displayed in that language.
Figure 5-3: Setting language and country/region
Note: If the language gets accidentally changed to something unfamiliar, pressing the following
buttons from the main menu will bring you back to this option: 8 then 1 then 1. Then press + or
- repeatedly until the desired language shows up.
Below that, the Country/Region is displayed. Press the + and – buttons on either side of the
displayed Country/Region to alphabetically move to the next or previous country or region.
Alternatively, both Language and Country/Region can be changed by pressing the + and –
buttons on the bottom of the screen. Press Back when you are done.

5.1.2 Units

Select desired units by pressing the US Standard or Metric button.

5.1.3 Date/time

Selecting this option takes you to a screen where the date and time can be set. The time is
manually set and will not automatically correct for daylight savings time.
38