Advertisement
S T A R S T T
<LCD contrast>
• Press the
or
pressing the
key and deep by pressing the
<BLOFFT>
• Enter the timer value (1 - 60) to turn off the LCD backlight and press the ENTER key.
<STARSTT>
• Enter the timer value (0 - 24) to reset a state that is clearing all operation and the test switch
setting to return the blank screen and the default of the test setting, and press the ENTER key.
If set "0", the state reset timer is not available.
4.2.6.10 Others
The plant name and description cannot be changed on LCD and can be viewed only.
To display the plant name and other data, do the following.
• Select "Settings" on the main "Main Menu" screen to display the "Settings menu" screen.
• Select "Others" to display the "Others" screen.
S e t t i n g s - O t h e r s
P l a n t n a m e
D e s c r i p t i o n
# # h r s
key to adjust the contrast. The characters on the screen become thin by
[ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ]
[ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ]
⎯
⎯
235
# # h r s
key.
2 5 / F e b / 2 0 0 3 0 9 : 4 5
6 F 2 S 0 8 4 2
Advertisement
