Advertisement
• Select the item to change, and then the following message are displayed.
P a s s w o r d [
• Enter a 4-digit number within the bracket and press the ENTER key. Then the following
message are displayed.
P r e s s E N T E R a n d r e t y p e n e w p a s s w o r d
• Press the ENTER key.
P a s s w o r d [
• Retype the password and press the ENTER key.
• If the retyped password is different from that first entered, the following message is displayed
on the bottom of the "Password" screen before returning to the upper screen.
P a s s w o r d i n c o r r e c t
Re-entry is then requested.
Password trap
After the password has been set, the password must be entered in order to enter the control
operation on MIMIC screen, the Setting change screen and the Test screen.
Note: The password of the settings includes the password of PLC editor and MIMIC editor tools.
If the password is not entered correctly, it is not possible to set any.
Changing the password
The password can be changed by entering a new 4-digit number on the "Password" screen in the
same way as the first password setting.
If you forget the password
Press the RESET and CANCEL keys together more than one second on the top "Main Menu"
screen. The screen goes off, and the password protection of the GRD150 is canceled. Set the
password again.
4.2.6.9 Panel
To enter LCD contrast and other data for LCD, do the following. The settings are available by the
front panel.
• Select "Settings" on the main "Main Menu" screen to display the "Settings menu" screen.
• Select "Panel" to display the "Panel" screen.
S e t t i n g s - P a n e l
L C D c o n t r a s t
B L O F F T
]
]
2 5 / F e b / 2 0 0 3 0 9 : 4 5
[ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
# # m i n
# # m i n
⎯
⎯
234
6 F 2 S 0 8 4 2
< 0 1 2 3 4 5 6 7 8 9
< 0 1 2 3 4 5 6 7 8 9
]
Advertisement
