Advertisement
Enter "S3" to perform the three-shot autoreclosing.
Enter "S4" to perform the four-shot autoreclosing.
Enter "S5" to perform the five-shot autoreclosing.
<OC∗-INIT, DOC∗-INIT, EF∗-INIT, DEF∗-INIT, SE∗-INIT, DSE∗-INIT, EXT-INIT>
To set the Autoreclosing initiation enable, do the following.
• Enter "NA" or "A1" or "A2" or "BLK" and press the ENTER key.
Enter "NA" not to initiate the autoreclosing.
Enter "A1" to initiate the Stage 1.
Enter "A2" to initiate the Stage 2.
Enter "BLK" to block the autoreclosing.
<COORD-OC, COORD-EF, COORD-SE>
To set the Co-ordination enable, do the following.
• Enter "On" to enable the Co-ordination and press the ENTER key. If disabling the
Co-ordination, enter "Off" and press the ENTER key.
<<Element>>
• The ranges of settings are as follows:
OC:
EF:
SEF:
TRDY:
T ∗ S ∗ :
T ∗ S ∗ S, T ∗ S ∗ C:
T ∗ S ∗ R:
TW:
TSUC, TRCOV, TARCP:
TEVLV, TRSET:
• Enter the numerical value and press the ENTER key.
• After setting, press the END key to display the following confirmation message.
C h a n g e s e t t i n g s ? Y = E N T E R / N = C A N C E L
• Press the ENTER (= Y) key to change settings and return to the "Settings menu" screen.
Setting the Sync CHK
To set the synchronism check setting, do the following.
• Select "Sync CHK" on the "Group ∗ " screen to display the "Sync CHK" screen.
S e t t i n g s - P r o t e c t i o n
G r o u p ∗ - S y n c C H K
# # # . # V # # # . # V
O V R
# # # . # V # # # . # V
U R B
0.2 - 250.0 (5A rating)
0.2 - 250.0 (5A rating)
0.025 - 0.125 (5A rating) 0.005 - 0.025 (1A rating)
0.0 - 600.0
0.01 - 300.00
0.01 - 300.00
0.01 - 310.00
0.01 - 10.00
0.1 – 600.0
0.01 - 300.00
2 5 / F e b / 2 0 0 3 0 9 : 4 5
⎯
⎯
210
6 F 2 S 0 8 4 2
0.04 - 50.00 (1A rating)
0.04 - 50.00 (1A rating)
Advertisement
