Advertisement
<<Scheme switch>>
<∗ ∗ ∗ ALMEN, WAREN>
To set the alarm or warning enable, do the following.
• Enter "Off"(disable) or "On"(enable) and press the ENTER key.
<<Element>>
• The ranges of settings are as follows:
I ALM, WAR:
V, Ve ALM, WAR:
P ALM, WAR:
Q ALM, WAR:
f ALM, WAR:
le ALM, WAR:
I, Ie HYST:
f HYST:
V, Ve HYST:
P HYST:
Q HYST:
• Enter the numerical value and press the ENTER key.
• After setting, press the END key to display the following confirmation message.
C h a n g e s e t t i n g s ? Y = E N T E R / N = C A N C E L
• Press the ENTER (= Y) key to change settings and return to the "Settings menu" screen.
Setting the Change value
To change values, do the following:
• Select "Change value" on the "Status" screen to display the "Change value" screen.
S e t t i n g s - S t a t u s
C h a n g e v a l u e
W h +
W h −
v a r h +
v a r h −
<<Element>>
• The range of settings is as follows:
0.0 - 999.9kA
0.0 - 999.9kV
− 999.9 - 999.9MW
− 999.9 - 999.9Mv
25.0 - 75.0Hz
0.00 - 99.99kA
0.00 - 0.10kA
0.00 - 0.10Hz
0.0 - 20.0kV
0.0 - 20.0MW
0.0 - 20.0Mv
# # # # # # k W h
# # # # # # k W h
# # # # # # k W h
# # # # # # k W h
# # # # # # k v h
# # # # # # k v h
# # # # # # k v h
# # # # # # k v h
⎯
⎯
226
2 5 / F e b / 2 0 0 3 0 9 : 4 5
6 F 2 S 0 8 4 2
Advertisement
