Advertisement
screen.
S e t t i n g s - P r o t e c t i o n
G r o u p ∗ - U C / T h e r m a l / B C D
U C 1 E N
# # . # A
U C 1
# # # . # # s # # # . # # s
T U C 1
U C 2 E N
# # . # A
U C 2
# # # . # # s # # # . # # s
T U C 2
T H M E N
T H M A E N
# # . # A
T H M
# # . # A
T H M I P
# # # . # m i n # # # . # m i n
T T H M
T H M A
<<Scheme switch>>
< UC∗EN>
To set the UC ∗ enable, do the following.
• Enter "On" to enable the UC ∗ and press the ENTER key. If disabling the UC ∗ , enter "Off"
and press the ENTER key.
<THMEN>
To set the Thermal OL enable, do the following.
• Enter "On" to enable the Thermal OL and press the ENTER key. If disabling the Thermal
OL, enter "Off" and press the ENTER key.
<THMAEN>
To set the Thermal alarm enable, do the following.
• Enter "On" to enable the Thermal Alarm and press the ENTER key. If disabling the Thermal
Alarm, enter "Off" and press the ENTER key.
<BCDEN>
To set the BCD enable, do the following.
• Enter "On" to enable the Broken Conductor and press the ENTER key. If disabling the
Broken Conductor, enter "Off" and press the ENTER key.
<BCD∗-2F>
To set the 2f block enable of BCD ∗ , do the following.
• Enter "BLK" to enable "Trip block" by the 2f element and press the ENTER key. If disabling
it, enter "NA" and press the ENTER key.
<<Element>>
• The ranges of settings are as follows:
∗ ∗ ∗
∗ ∗ ∗
B C D E N
# # . # A
B C D - 2 F
B C D
∗ ∗ ∗
∗ ∗ ∗
T B C D
# # . # A
∗ ∗ ∗
∗ ∗ ∗
∗ ∗ ∗
∗ ∗ ∗
# # . # A
# # . # A
# # %
# # %
⎯
⎯
201
2 5 / F e b / 2 0 0 3 0 9 : 4 5
∗ ∗ ∗
∗ ∗ ∗
∗ ∗ ∗
∗ ∗ ∗
# . # # A
# . # # A
# # # . # # s # # # . # # s
6 F 2 S 0 8 4 2
Advertisement
