Advertisement
• Enter the delay time ( − 9999 - 9999) and press the ENTER key.
< GMT>
When the calendar clock is synchronized with the IRIG-B time standard, it is possible to transform
GMT to the local time. To set the time zone, do the following.
• Enter the difference between GMT ( − 12 - 12) and local time and press the ENTER key.
< Clock adjustment>
To adjust the clock when the internal clock is running locally, do the following:
• The range of settings is as follows:
Minute:
Hour:
Day:
Month:
Year:
• Enter a numerical value for each item and press the ENTER key.
• After setting, press the END key to display the following confirmation message.
C h a n g e s e t t i n g s ? Y = E N T E R / N = C A N C E L
• Press the ENTER (= Y) key to change settings and return to the "Settings menu" screen.
4.2.6.7 Communication
If the relay is linked with a communication such as RSM (relay setting and monitoring system) or
IEC60870-5-103 communication, etc., the communication setting must be configured. Do this as
follows:
• Select "Settings" on the main "Main Menu" screen to display the " Settings" screen.
• Select "Communication" to display the "Communication" screen.
S e t t i n g s - C o m m u n i c a t i o n
F r o n t p o r t
R e a r p o r t
P r o t o c o l
Setting the Front port
• Select "Front port" on the "Communication" screen to enter the port setting.
S e t t i n g s - C o m m u n i c a t i o n
0 - 59
0 - 23
1 - 31
1 - 12
1990 - 2089
2 5 / F e b / 2 0 0 3 0 9 : 4 5
2 5 / F e b / 2 0 0 3 0 9 : 4 5
⎯
⎯
228
6 F 2 S 0 8 4 2
Advertisement
