Advertisement
• Press the ENTER (= Y) key to change settings and return to the "Settings menu" screen.
4.2.6.4 Setting the Recording
To set the recording function as described in Section 4.2.4, do the following:
• Select "Settings" on the top "Main Menu" screen to display the "Settings" screen.
• Select "Record" on the "Settings" screen to display the "Record" screen.
S e t t i n g s - R e c o r d
F a u l t R e c o r d
D i s t u r b a n c e R e c o r d
C o u n t e r
Setting the Fault Record
To change the Fault Record settings, do the following:
• Select "Fault Record" on the "Record" screen to display the "Fault Record" screen.
S e t t i n g s - R e c o r d
F a u l t R e c o r d
F a u l t l o c a t o r
• Enter "On" to use the fault locator. If not to be used, enter "Off". Enter the number and press
the ENTER key.
• After setting, press the END key to display the following confirmation message.
C h a n g e s e t t i n g s ? Y = E N T E R / N = C A N C E L
• Press the ENTER (= Y) key to change settings and return to the "Disturbance Record"
screen.
2 5 / F e b / 2 0 0 3 0 9 : 4 5
2 5 / F e b / 2 0 0 3 0 9 : 4 5
∗ ∗ ∗
∗ ∗ ∗
⎯
⎯
216
6 F 2 S 0 8 4 2
Advertisement
