Advertisement
4.2.6.5 Setting the Status
To set the status function as described in Section 4.2.5, do the following:
• Select "Settings menu" on the top "Main Menu" screen to display the "Settings menu" screen.
• Select "Status" on the "Settings menu" screen to display the "Status" screen.
S e t t i n g s - S t a t u s
M e t e r i n g S w i t c h
A l a r m / W a r n i n g
C h a n g e v a l u e
Setting the Metering Switch
To change the metering switch setting, do the following:
• Select "Metering Switch" on the "Status" screen to display the "Metering Switch" screen.
S e t t i n g s - S t a t u s
M e t e r i n g S w i t c h
D i s p l a y v a l u e
P o w e r
C u r r e n t
D e m a n d t i m e
Note: Power and Current setting
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗
Active Power Display
Power setting=1(Send)
＋
－
V
I
－
＋
⎯
⎯
223
2 5 / F e b / 2 0 0 3 0 9 : 4 5
2 5 / F e b / 2 0 0 3 0 9 : 4 5
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗
Power setting=2(Receive)
－
＋
V
I
＋
－
6 F 2 S 0 8 4 2
Advertisement
