Advertisement
The binary input signal is user configurable by PLC function. The status is expressed with logical
level "1" or "0" at the photo-coupler output circuit.
Line 3 and 4 shows the binary output status. All binary outputs BO1 to BO6 are configurable by
PLC function. The status of these outputs is expressed with logical level "1" or "0" at the input
circuit of the output relay driver. That is, the output relay is energised when the status is "1".
4.2.5.5 Displaying the Relay model information
To display the relay model information such as relay type, serial No., software version PLC data
and IEC103 data, do the following:
• Select "Status" on the top "Main Menu" screen to display the "Status" screen.
• Select "Information" to display the information.
S t a t u s - I n f o r m a t i o n
R e l a y v e r s i o n
R e l a y t y p e :
S e r i a l N O . :
M a i n s o f t w a r e :
P L C d a t a :
I E C 1 0 3 d a t a :
2 5 / F e b / 2 0 0 3 0 9 : 4 5
G R D 1 5 0 - 1 0 1 A - 3 0 - 1 0
1 2 3 4 5 6 7 8 9 0
G S 1 F M 1 - 0 1 - A
P L C D e f a u l t 1 0 ( 1 2 E 0 5 A 7 8 )
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ( 0 0 0 A E 3 0 9 )
⎯
⎯
168
6 F 2 S 0 8 4 2
Advertisement
