Advertisement
Record
In the "Record" menu, the fault records, alarm records, event records, disturbance records and
counts such as trip count and ΣIy count can be displayed or erased.
Status
The "Status" menu displays the metering of power system quantities, relay measuring element
status, condition monitoring status, binary input and output status and information such as relay
version.
Settings
The "Settings" menu is used to view and change the settings of protection, control, record,
metering, signal source for time synchronisation or clock adjustment, communication, password,
LCD contrast and others.
Since this is an important menu and is used to change settings related to relay tripping, it has
password security protection for changing.
Test
The "Test" menu is used to set testing switches, to forcibly operate binary output relays, and to
monitor signals of logic circuits.
Since this is an important menu and is used to change settings related to relay tripping, it has
password security protection for changing.
When the LCD is off, press any key other than the VIEW , RESET , L/R , SELECT ,
, F1 and F2 keys to display the top "MENU" screen and then proceed to the relay
menus.
M a i n M e n u
M I M I C
R e c o r d
S t a t u s
S e t t i n g s
T e s t
In case of selecting "Settings" or "Test", display guidance as follows. If one of them is selected on
the top "Main Menu" screen, the password trap line "Password" is displayed. If the password is not
entered correctly, it is not possible to move to the "Settings" or "Test" sub-menu screens. When
inputting nothing and pressing the ENTER key, "Settings" menu or "Test" menu are only view
mode that can not change values. (For details of password, see Section 4.2.6 and 4.2.7.)
M a i n M e n u
M I M I C
R e c o r d
2 5 / F e b / 2 0 0 3 0 9 : 4 5
2 5 / F e b / 2 0 0 3 0 9 : 4 5
⎯
⎯
152
6 F 2 S 0 8 4 2
,
Advertisement
