Advertisement
<M.D.BLK>
M.D.BLK is used to block the monitor direction in IEC103 communication. If the blocking of the
direction is activated, all indications and measurands are no longer transmitted.
• Enter "Normal" or "Blocked" and press the ENTER key.
• After setting, press the END key to display the following confirmation message.
C h a n g e s e t t i n g s ? Y = E N T E R / N = C A N C E L
• Press the ENTER (= Y) key to change settings and return to the "Settings menu" screen.
DNP3.0
• Select "DNP3.0" on the "Protocol" screen to display the "DNP3.0" screen..
S e t t i n g s - C o m m u n i c a t i o n
P r o t o c o l - D N P 3 . 0
A d d r e s s
A d d r e s s 2
<Address>
• Enter the address number (0 - 30000) and press the ENTER key.
• After setting, press the END key to display the following confirmation message.
C h a n g e s e t t i n g s ? Y = E N T E R / N = C A N C E L
• Press the ENTER (= Y) key to change settings and return to the "Settings menu" screen.
4.2.6.8 Password
For the sake of security of MIMIC operation, setting changes and test setting, etc., password
protection can be set as follows:
• Select "Settings" on the main "MENU" screen to display the "Settings menu" screen.
• Select "Password" to display the "Password" screen.
S e t t i n g s - P a s s w o r d
I n p u t n e w M I M I C p a s s w o r d
I n p u t n e w S e t t i n g p a s s w o r d
I n p u t n e w T e s t p a s s w o r d
2 5 / F e b / 2 0 0 3 0 9 : 4 5
# # # # #
# # # # #
# # # # #
# # # # #
2 5 / F e b / 2 0 0 3 0 9 : 4 5
: ∗ ∗ ∗ ∗
: ∗ ∗ ∗ ∗
: ∗ ∗ ∗ ∗
⎯
⎯
233
6 F 2 S 0 8 4 2
Advertisement
