Performing Remote Measurement With The Http Server; Connecting To The Http Server - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

9.5 Performing Remote Measurement with the HTTP
Server
This section describes how to use the instrument's HTTP server function to control it remotely using
a computer.
You can configure instrument settings and monitor screens using a standard browser such as
®
Internet Explorer .
To perform remote measurement using the HTTP server function, you must configure LAN settings
and use a LAN connection.
Remote measurement using the HTTP server function is not available when performing
measurement using a program written in a language such as Visual Basic

Connecting to the HTTP server

This section describes how to connect to the HTTP server using a computer.
2 2
1
Launch Internet Explorer
2
Enter the instrument's address into the address bar (for example,
3
(When the instrument's
Enter the username and password to log in.
Set a username and password to prevent inadvertent operation of the HTTP function by other
users.
If you plan to access the instrument frequently from multiple computers, set the
authentication settings]
See "FTP server connection limitations (FTP authentication)" (p. 2 08).
It is recommended to use Internet Explorer
Set the security level to
Unit Measure

Performing Remote Measurement with the HTTP Server

on the computer.
®
[FTP/HTTP authentication settings]
setting to [OFF].
®
11 or later.
[Medium] or [Medium-high].
Channel Trigger Alarm
®
.
setting is [ON])
[FTP/HTTP
Calculation System
).
9
201