Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 105

Data That Can Be Saved and Loaded
Preparing for power outages and configuring associated settings
Do not use damaged media.
„
Doing so could prevent processing to close files from completing in the anticipated
amount of time, corrupting files.
Measurement data will be lost if power is interrupted during measurement. It is recommended to
make the following preparations and settings when measuring data for an extended period of time.
• Use the Z1007 Battery Pack.
When using the optional Z1007 Battery Pack, the instrument will switch immediately to battery
power if power from the AC Adapter is interrupted. In this way, measurement can be continued
without losing any data.
If the battery's remaining charge declines, the instrument will not be able to save or load data.
See "2.2 Installing a Battery Pack" in the Quick Start Manual.
• Set auto saving to
Waveform data will be saved to an SD Memory Card or USB Drive while measurement continues.
You can continue measurement in the event of a power outage by using the Z1007 Battery Pack.
See "3.3 Saving Data" (p. 1 05).
It is recommended to use the
Files saved using the
Utility.
Binary data (MEM files) saved using the
using the Logger Utility.
102
NOTICE
[Waveform data].
[Binary]
[Text] (CSV) setting cannot be loaded by the instrument or the Logger
(MEM) setting for auto saving.
[Binary] setting can be converted to the CSV format