Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 7

Notations related to standards compliance
Li-ion
Other notations
*

(p. )
Bold
[ ]
Windows
S/s
Accuracy
Hioki defines tolerances for measured values in terms of f.s. (full scale), as indicated below.
f.s.
Indicates compliance with the Waste Electrical and Electronic Equipment (WEEE)
Directive in EU member nations.
Indicates that the instrument is targeted for recycling under the Act on the Promotion of
Effective Utilization of Resources.
Indicates that the instrument complies with standards imposed by EU directives.
Indicates useful advice concerning instrument performance and operation.
Instructs the reader to see below for additional information.
Indicates the default setting. When initialized, the instrument will revert to this value.
Indicates the page number to reference.
The names of control keys are printed in bold.
The names of user interface elements on the screen are enclosed in brackets
Unless otherwise noted, the term "Windows" is used generically to refer to Windows 7,
Windows 8, and Windows 10.
For the instrument, the number of times the analog input signal is digitized is indicated
in samples per second (S/s).
Example: 20 MS/s (20 megasamples per second) signifies 20×10
second.
Maximum display value, scale magnitude
Indicates the maximum display value or scale magnitude. Generally speaking, the f.s.
figure indicates the range in current use.
Example: f.s. for the 1 V range = 1 V
About the Notations Used in This Manual
6 samples per
([ ]).
3