Channel Comments - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Entering Comments

Channel comments

This section describes how to enter a string of text for each channel. (Up to 40 single-byte
characters)
See "Text entry method" (p. 8 ).
Channel comments are displayed on the screen when the waveform screen is set to [Wave+Value].
Channel comments allow you to identify channels when measuring numerous channels.
> >
1
Select [Comment]
press the ENTER
The text entry window will open.
See "Text entry method" (p. 8 ).
2
Enter text and press the
The entered text will be accepted.
You can use [Comment]
See "1.7 Configuring Channels in a List" (p. 5 0).
48
1 1
with the Left Arrow, Right
key.
ENTER key.
on the settings list screen to enter channel comments.
Arrow, Up Arrow, and Down Arrow keys and