Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 168

3
Under [Backlight brightness], select the backlight brightness.
1, 2, 3 , 4, 5

Larger values indicate higher brightness levels.
Lowering the backlight brightness (dimming the backlight) will allow the instrument to operate longer on battery
power.
4
Under [Language], select the user interface language.
Press the ENTER key to display a settings window. Configure screen display and keyboard
settings.
Select [OK] after selecting the language to close the window. Select
without changing any settings.
日本語
(Japanese), English,
*: Available soon.
5
Under [Waveform background
Dark , Light

Dark
6
Under [Beep sound], select whether to beep when a warning or error occurs.
ON , OFF

7
Under [Operation error
starting and stopping measurement.
ON Displays a confirmation window when the

Press the
OFF Starts measurement immediately when the
Stops measurement immediately when the
When measurement starts, data in the instrument's internal buffer memory will be deleted, and the instrument
will start to record new data.
Select the [ON] setting to prevent waveform data from being inadvertently deleted.
Unit Measure
简体中文
(Simplified Chinese)*,
color], select the background color for the waveform screen.
prevention], select whether to display a confirmation window when
ENTER key while [Yes]
Channel Trigger Alarm
[Cancel]
한국어
(Korean)*
Light
START key or STOP
is selected to start or stop measurement.
START key is pressed.
STOP key is pressed.
Calculation System
Configuring Settings
to close the window
key is pressed.
165
7