Sending A Test File - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Sending a test file

This section describes how to check whether the instrument can send a file using FTP.
> >
1
Press the ENTER
The settings window will open.
The identifiers whose checkboxes are selected under
filename.
2
Press the ENTER
The test file [FTP_TEST.TXT]
If you are unable to send the test file, check the instrument's automatic send settings and the
computer's FTP settings.
If you find no issues when sending the test file, start measurement.
Measured waveform data will be automatically sent to the computer's FTP server.
Unit Measure
key while [FTP data auto send settings...]
key while [Send test] is selected.
will be sent to [C:\Intpub\ftproot].
Channel Trigger
Sending Data Using the FTP Client
2 2
is selected.
[Filename identifier]
Alarm Calculation System
1 1
will be added to the
227
9