Initializing (Resetting) The System - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Initializing (resetting) the system

This section describes how to reset all settings to their factory defaults.
See "11.9 Settings after Initialization (System Reset)" (p. 2 90).
> >
1
Press the ENTER
The settings window will open.
2
Select the checkboxes for the settings you wish to initialize.
Settings data
Unit registration information
Waveform data
Communication
3
Press the ENTER
The settings will be initialized.
Press the ENTER key while
settings.
If you initialize module information and communications settings, you need to re-register all
wireless modules and re-configure the LAN settings.
Ordinarily, it is not recommended to initialize them.
Unit Measure
2 2
3 3
key while [Initialize...] is selected.
Resets all non-LAN settings to their default values.
Deletes information for all registered wireless modules.
Deletes waveform data.
Resets LAN settings to their default values.
key while [OK] is selected.
[Cancel] is selected to close the window without initializing any
Channel Trigger
1 1
Alarm Calculation System
Controlling the System
7
169