Configuring Channel Settings At Once - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Configuring Channels in a List

Configuring channel settings at once

This section describes how to turn the measurement on or off and configure the waveform display
color settings for all channels on a module.
> > [Unit n]
1 1
1
Select the measurement ON/OFF checkbox and press the
Each time you press the
ON and OFF.
2
Select the measurement display color checkbox and press the
Each time you press the
and OFF.
56
(n = 1, 2, . . .)
2 2
ENTER
key, the measurement setting for all channels will toggle between
ENTER key, the display setting for all channels will toggle between ON
ENTER key.
ENTER key.