Filenames - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Filenames

11.6 Filenames
Filenames consist of the following parts:
WAVE0001.MEM
1 1 2 2 3 3
No.
1 1
File type
2 2
Automatic numbering
3 3
Extension
Data type
Setting conditions
Waveform data
Numerical calculation
results:
Without
segmentation
Numerical calculation
results:
With segmentation
Screen images
*1: Dated folders are created automatically. In delete-and-save operation, the oldest waveform files are
deleted first.
Once all of the waveform files in the dated folder have been deleted, the folder will be automatically
renamed.
Example: 19-12-26 (before update) → 19_12_26_191230_101113 (after update: date_date of update_
time)
Hyphens ("-") are changed to underbars ("_"), and the date on which the folder was renamed is added to
the end of the name.
(Updated at 10:11:13 am on December 30, 2019)
*2: If saved manually.
*3: If saved automatically. If a filename has been specified, that filename will be used.
*4: If [Delimiter] is set to a setting other than [Comma], the extension will be [.TXT].
*5: If [File splitting]
at 0001) will be followed by an underbar ("_") and the calculation number.
286
Item
Folder
CONFIG CONF
1
DATA * WAVE *
AUTO *
MEASUREMENT MEAS *
/ALL AUTO *
MEASUREMENT MEAS *
/PART AUTO *
PICTURE SCR
under [Numerical calculation results]
Automatic
File type
numbering
Starting at 0001
2
Starting at 0001
3
2
Starting at 0001*
3
2
Starting at 0001*
3
Starting at 00001
is set to [Individual
Extension
.SET
.MEM
4
.CSV *
5 4
.CSV *
5 4
.CSV *
.PNG
calc], the number (starting