Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 110

> >
1 1
2 2
3 3
1
Enter the filename to use during auto-save operation in the
byte characters).
See "Text entry method" (p. 8 ).
A serial number beginning from 0001 (in increments of one) will be appended to entered file names.
Example: Filename: [ABC], Format :binary
ABC0001.MEM, ABC0002.MEM, ABC0003.MEM, . . .
Example: Filename: [ABC100], Format: binary
ABC1000001.MEM, ABC1000002.MEM, ABC1000003.MEM, . . .
If you do not specify a filename, a filename will be assigned automatically.
See "When saving files without specifying a filename" (p. 1 00).
Under [Add trigger date/time],
Adds the date and time at which the trigger activated to the waveform data filename.

Does not add the trigger activation date and time the end of the waveform data
filename.
When the [Add trigger date/time]
Entered filename_191224_235959_0001.MEM (when the trigger activated at 23:59:59 on December 24, 2019)
2
Under [Media], select the media to give priority when saving data.
SD card USB flash drive
 ,
When both an SD Memory Card and USB Drive are inserted, the system will save data on the selected media.
If the selected media is not inserted, the system will save data on the other media.
Unit Measure
select whether to add date and time to the filename.
check box is selected, the file is named as below.
Channel Trigger Alarm
4 4
5 5
[File name] field (up to 8 single-
Calculation System
Saving Data
3
107