Checking Ftp Communications Status - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Sending Data Using the FTP Client
Data transmission times
Transfer time (s) = File size (KB) / transfer speed (KB/s) + transfer preparation time (s)
For more information about file sizes, see "11.8 File Size" (p. 2 89).
Use 4 MB/s as a rough transfer speed and 3 s as a rough transfer preparation time.
Example: For a 40 MB file
Transfer time = 40 MB/4 (MB/s) + 3 (s) = 10 + 3 (s) = 13 (s)

Checking FTP communications status

This section describes how to check the FTP communications status.
You can display the number of files sent by FTP, the number of transmission errors, and other
statistics.
> >
1
Press the ENTER
The settings window will open.
2
Under [FTP communication
Total, Sent, Failed,
The counters will be reset to 0 under the following circumstances:
• When measurement is started by pressing the
• When the LAN settings are changed
• When the wireless LAN settings are changed
• When the FTP client settings are changed
228
2 2
key while [FTP data auto send settings...]
status], check the file counters.
Unsent
is selected.
START key
1 1