Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 49

Scaling settings during integration measurement
You can use the scaling function to convert the integrated pulse count to the measurement target's
physical properties (watt hours, volt-amperes, etc.) and then display or record the result.
The pulse output device will have predetermined physical quantity that corresponds to 1 pulse or
a number of pulses that corresponds to a value of one in the basic units (for example, 1 kWh, 1 L,
3
1 m ).
> >
1
Select the scaling display method.
OFF 
Decimal
Exponent
2
Enter the post-conversion unit (up to 7 single-byte characters).
See "Text entry method" (p. 8 ).
Unit Measure
1 1
3 3
Does not use the scaling function.
Displays converted values as decimals.
Displays converted values as exponents.
Channel Trigger
2 2
Alarm Calculation System
Using the Scaling Function
45
1