Measuring The Thickness - Omron ZW-8000 Series User Manual

Measuring the Thickness

If you have glass of known thickness, scaling can be adjusted referenced to that glass so that transparent
objects can be measured more easily.
Edge 1st
Edge 2nd
Item Setting item
Thickness Measurement
settings surface 1
Measurement
surface 2
 Multi View Explorer
→ Edit pane
→ Task Settings window : [Measurement mode]
1
Select [Thickness] in [Measurement mode].
2
Select the measurement surface (top
surface) targeted for measurement from
[Measurement surface 1].
3
Select the measurement surface (rear
surface) targeted for measurement from
[Measurement surface 2].
Important
• When the measurement surface setting is set to Peak for thickness measurement, the measurement may become
unstable depending on the incident level on each surface. Change the measurement surface setting for each
surface from Peak to 1/2/3/4.
• With the above procedure, the same area surface must be set for Measurement surface 1 and Measurement
surface 2. Therefore, to set different area surfaces for Measurement surface 1 and Measurement surface 2, set the
height measurement of each surface to two tasks and calculate the difference.
140
Setting Measurement Items
Sensor head
Transparent
object
Thickness
Setting value
Edge1/Edge2/Edge3/Edge4/
Peak (default value)
Edge1/Edge2 /Edge3/Edge4/
Peak (default value)
: [Bank Group] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
The measurement surface (top surface) targeted for
measurement can be switched.
The peak is the surface of all measurement surfaces having
the highest received light amount.
The measurement surface (rear surface) targeted for
measurement can be switched.
The peak is the surface of all measurement surfaces having
the highest received light amount.
)
ZW-8000/7000/5000
User's Manual