Omron ZW-8000 Series User Manual page 137

EdgeTracks automatically sets the track areas for each measurement cycle. Therefore, it automatically tracks,
even when the measurement surface position changes due to target vibration, etc.
Example: When measuring transparent target (2 edges)
Item Setting item
EdgeTracks EdgeTracks
Edge1 track width
Edge2 track width
Edge3 track width
Edge4 track width
ZW-8000/7000/5000
User's Manual
1 surface 2 surface
Move target
Setting value Description
OFF/ON Set EdgeTracks function ON/OFF.
0.000 to 65.535 [mm] Sets track effective width [mm] of edge 1.
Recognizes the edge inside the track effective width as edge 1
after Area Teach is executed.
0.000 to 65.535 [mm] Sets track effective width [mm] of edge 1.
Recognizes the edge inside the track effective width as edge 2
after Area Teach is executed.
0.000 to 65.535 [mm] Sets track effective width [mm] of edge 1.
Recognizes the edge inside the track effective width as edge 3
after Area Teach is executed.
0.000 to 65.535 [mm] Sets track effective width [mm] of edge 1.
Recognizes the edge inside the track effective width as edge 4
after Area Teach is executed.
Transparent target
Even if the target is
moved, the track
areas are followed.
135
Setting Sensing