Performing Calculations - Omron ZW-8000 Series User Manual

Note
• Thickness measurement can also be set by the operating keys on the Sensor Controller.
Measuring the Thickness p.238
• For the setting of measurement area to control of light adjustment, refer to the following:
Setting Light Exposure Time Control Mode p.129
Setting Exposure Time Control Mode p.232

Performing Calculations

Perform calculations using the results calculated by the tasks. The calculation formula is mX+nY+K.
Item Setting item
Calculation Parameter X
Parameter Y
Parameter K
Parameter m
Parameter n
 Multi View Explore
→ Edit pane
→ Task Settings window : [Measurement mode]
Select [Calculation] in [Measurement mode].
1
Select [Calculation] in [Measurement mode].
2
Select the task to be calculated from
[Parameter X] and [Parameter Y].
3
Select the offset value from [Parameter K].
4
Select the coefficient from [Parameter m]
and [Parameter n].
Note
Performing Calculations can also be set by the operating keys on the Sensor Controller.
Calculating p.239
ZW-8000/7000/5000
User's Manual
Setting value
OFF (default value)/TASK1 to TASK4
OFF (default value)/TASK1 to TASK4
-999.999999 to 999.999999
(default value: 0)
-10.0 to 10.0 (default value: 0)
-10.0 to 10.0 (default value: 0)
: [Bank Group] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
The task to be calculated can be switched.
When the TASK1 is selected, TASK1 is not
displayed in the setting item.
The task to be calculated can be switched.
When the TASK1 is selected, TASK1 is not
displayed in the setting item.
Set the offset value.
Set the coefficient value.
Set the coefficient value.
)
Setting Measurement Items
141