Setting the extension fiber cable length
Here is an explanation of the procedure for setting the extension fiber cable length to "10m".
Operating procedure
Steps
Key operation
1
2
3
4
5
ZW-8000/7000/5000
User's Manual
Display
Description
Press and hold the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222)
Press the
the
Press the
the
Select the extension fiber cable length.
The current setting value is displayed on the sub-display.
Press
blinks.
In this example, select "10M" and press the
Press and hold the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
key for two seconds or more to enter the
/
keys to select "SYSTEM" and press
key.
/
keys to select "CABLE" and press
key.
/
key to enter the editing mode and the sub-display
key for two seconds or more to enter the
key.
273
Setting the System